Titanium Chassis - for Arrma 6s SWB Outcast, Notorious, Typhon, Senton

A super tough chassis for super tough trucks - the ultimate bashers choice. Arrma tough PLUS!

This is a new profile, compatible with all versions V1-V5 and EXB parts (Pictures are of the old type - to be updated!)

Built of 3mm ti 6al-4v, it gives you unparalleled strength and durability to weight. Three times stronger than 6061 aluminium and almost twice as strong as 7075.

This chassis is around 20% stiffer than the stock chassis. This means the chassis will still flex to absorb impacts but will still tauten handling and response.

This is a direct replacement. All standard fixings can be re-used.

Additional expensive skid plates or droop screw stops are not required - the titanium is tough and isn't going to wear down like aluminium. Taking this into account, the Titanium is the strongest, and also most cost effective choice.

At 540g it is lighter than some other aftermarket chassis whilst making no sacrifice of durability.

A really fun thing also happens - the titanium will give a shower of sparks when it catches hard surfaces!

Material Properties Comparison

Titanium Ti-6Al-4V

Density 4.43 g/cc

Tensile strength to yeild 880 Mpa

Modulas of elasticity 113.8 GPa

Aluminium 6061-T6

Density 2.7 g/cc

Tensile strength to yeild 276 Mpa

Modulas of elasticity 68.9 GPa

Aluminium 7075-T6

Density 2.81 g/cc

Tensile strength to yeild 503 Mpa

Modulas of elasticity 71.7 GPa

Modifying your RC from stock condition can result in unexpected results. Operation of modified models must take this into account. Always follow the original manufacturers instructions. Whilst we build our parts to the highest standards we are able, like all rc parts, our parts cannot be guaranteed for performance, strength and durability in every situation or configuration. Do not use your RC in public areas. Do not use your RC where unexpected results could cause injury or damage to property. High Speed RCs require GREAT CARE and a responsible attitude to use safely.