Scorched Parts unique Carbon Fibre and 7075 Chassis.
This is a very special full length, flat bottom chassis. Some of the fastest guys in the world will be running this chassis this year. We've run this chassis at the UK ROSSA event with great success, topping the speeds at 176mph. This amazing chassis has limited availability and is recommended for experienced builders of speed or drag racers.
The front of the chassis is extended forwards, filing around the front wheels, right up to the front splitter. This full flat bottom is expected to greatly improve under body aerodynamics.
The chassis is drilled for both standard motor position (will take standard shaft lengths) and ‘SPC’ position with the mount moved forwards to allow bigger motors up front (Only in combination with Pinocchio Spool Set).
The Chassis is now supplied with a stainless steel 'high mass' front splitter mount to help keep the nose of the car down (some pictures show the original carbon splitter mount)
Chassis is pre drilled for a rear left mounted XLX2 esc. No other mounting holes are made. (The main pic shows all the extra holes made for our build) We sell a drill and countersink set for drilling the chassis.
All other details are the same as our proven carbon fibre chassis kits:
Includes correct chassis ‘kick up’ at the front to maintain correct steering geometry.
Utilising a composite construction with 7075 end pieces to take the high loads. No problems with droop screws or weakness in thin sections.
Made from 4mm top quality Toray 3k carbon fibre, providing fantastic strength to weight ratio. Precision machining for a perfect fit and a high quality satin finish.
Splitter NOT included.
Not suitable for the titanium front skid, and not drilled for the rear skids (but holes can be added)
Check out our Side Body Posts and awesome battery strap mounts that enable custom battery positioning.
To mount components, we recommend using masking tape to mark out and drill the chassis.